HOW TO OPERATE ELECTRONIC

HOW TO CHARGE HAND PHONE BATTERY

Prepare Your            :

Handphone

Batterycharger

Steps : 

1. Connect the charger to your hand phone, the flash symbol on the charger plug must face upward.
2. Wait until the battery icon appears on the screen.
3. Charge the battery approximately 5 hours or until the battery icon indicates that the battery is fully charged.
4. Remove the charger by pulling out from your hand phone.

How to Operate a Computer

Kinds of Materials is Needed:

·                     CPU

·                     Monitor

·                     Keyboard

·                     Mouse

·                     Active Speakers

·                     Printer

·                     Operating System

Here are the steps to operate a computer:

1).Before plug of  powering up the computer system, make sure that the power cable    connected to the back panel of the CPU and is plugged into the electric socket.

2).Make sure the video cable is already connected to the video card correctly into the back of the panel

3).Make sure both devices are the mouse and keyboard are mounted on the rear panel to the right. Because if one is installed then the port can not enter. For steps 1 to 3 is basically very easy to do because in addition to the mouse and keyboard devices, other components can only be plugged into the appropriate port in order to prevent novice users from installation errors.

4).When everything is plugged in securely, then press the power button on the CPU is usually located on the front panel of the CPU.

5).The computer will display the Windows logo and displays the desktop image

6).Once the desktop image appears then the computer is ready to operate

7).The proper way to shut down or turn off the computer system is by clicking on the ‘Start’ button and choosing the ‘Turn Off Computer’ option. This will display the options to ‘Standby’, ‘Restart’, or ‘Turn Off’ the CPU.

                                                How To Use Printer 

Prepare your :

Printer

Paper

a Computer

Steps :

1.       Make sure that your printer is hooked up properly before using it. If this is a brand new printer then it will go through a check and print out a test page for you. A lot of different times you can just turn it on, you will hear the ink moving around. Something might come up on the computer telling you that the printer is on and working properly.

2.       Open the page you want to print. If you are on the Internet and want to print something from there. All you have to do is go up to file, then down to page set up. This will give you more printing options to choose from. When you are done setting up the page you can verify you have the right printer hooked up by clicking on "Printer" at the bottom. Once everything looks good click on "OK" and now your page should print out.

3.       Open up a ".doc" file if that is where your page is that you need to print. When you are ready to print go up to "File" and "Print Setup". Again you can choose how you want your page to look, and check and make sure the right printer is installed. If your page is set up the way you like it you can just click on the printer icon on the tool bar or go to "File" then "Print."

4.       Using a printer a lot over time will start to wear down your ink supply. Some models of printers let you know when your ink supply is getting low. If you have an older printer you will just have to go by what the printed page looks like. If it is very worn and faded then it is time to install a new ink cartridge.